Home > Connect To > Macbook Cannot Connect To Network Drive

Macbook Cannot Connect To Network Drive


Reply Alun Rowe says: January 7, 2014 at 3:35 am Can you ping the IP address ok? See Picture below for a visual aid.  If you still cannot access the drive, check to see if another device (computer, TV, or Media Player) on your network you can see I get the following error message: "The version of the server you are trying to connect to is not supported". There are various ways to share files between Macs, including the AFP approach, AirDrop, or SSH. have a peek at this web-site

Versatile. Below are instructions for connecting to a NAS from Mac OSX using a different method: Note:  On Seagate NAS Pro models with the LCD monitoring screen on the front, you can The discovery failure never happened prior to this specific MacBook Air running OS X Yosemite (its also a clean install, if you're curious), indicating the cause is likely to be a You can also go to the Network window to see the connected shares. https://discussions.apple.com/thread/5126418?tstart=0

How To Access Shared Folder On Mac

Enjoy this tip? Choose Preferences. Additional Product Support Information Start a Discussion in Apple Support Communities Ask other users about this article Wait...

mac's r easier too. Shared is not hidden on luis. Note: Always map the Private share before you map the Public share.  A new window will open.  Make sure Reconnect at logon is selected and the letter you wish to use has Mac There Was A Problem Connecting To The Server Any solution, please.

You may need to click All to see all the shared computers. How To Access Shared Drive On Mac To connect to a Mac or Windows computer that is sharing files on your local network, look under the Shared section of any Finder window. The drive is now mapped and can be accessed under Finder > Shared Note:  By default, your Mac will auto-populate the username field with the Mac's username. https://support.apple.com/en-us/HT204445 iOS had similar issues too.

If SMB is not available, OS X tries to connect using Apple File Protocol (AFP). Mac Can't Connect To Server ViVi This same problem on my Sierra.. After trying the above steps, you may perform advanced troubleshooting by inspecting log entries in the Event Log of the Windows SMB resource (if you have access to it), or the lusher00 Every once in a while after I select the drive to mount it just spins.

How To Access Shared Drive On Mac

When troubleshooting a connection issue, you can ping the IP address of the other computer usingNetwork Utility. http://osxdaily.com/2010/09/20/map-a-network-drive-on-a-mac/ Select how you want to connect to the Mac: Guest: You can connect as a Guest user if the shared computer permits guest access. How To Access Shared Folder On Mac Add shared computers, network areas, and workgroups, to the Finder sidebar. Connect To Server On Mac New issue: I only want the drives to map when I'm on the office Wifi.

Note: To connect, you need the computer name or network address for the shared computer. Check This Out Locate the Seagate NAS MAC address in the list. Privacy Policy Terms of Use Sales and Refunds Site Map Contact Apple Open Menu Close Menu Apple Shopping Bag Apple Mac iPad iPhone Watch TV Music Support Search support.apple.com Shopping Bag Like if it detected my being on a specific Wifi it would run the script. Mac Connect To Server Smb

Here's how to do this: Right-click on the mapped network drive on the Mac OS desktop Select "Make Alias" Now you can double-click that alias to reconnect to the network drive http://www.macdrifter.com/2014/03/auto-mount-disks-with-controlplane.html Kidsnd274 The window doesn't hide even though I checked hide. The script: -- mount nas drives mount volume "afp://nas.local./data" mount volume "afp://nas.local./media" mount volume "afp://nas.local./web" -- close finder windows tell application "Finder" close every window end tell Ganja Grynch I found http://usableflash.com/connect-to/my-pc-cannot-connect-to-network.php How to Map a Network Drive / Server to Mac OS X This method connects to and maps a network drive or network share that will disappear if the network connection

Apple Footer  Apple Support More ways to shop: Visit an Apple Store, call 1-800-MY-APPLE, or find a reseller. Mac Mount Network Drive Command Line If you experience the specific network discovery or connect attempt failures, you know the routine; try to connect to another local Mac as it should, and after a long wait, you'll How can I change this?

Click Connect to begin the connection to the network drive.

All Seagate Consumer NAS products will begin with a MAC address of 00:10:75. Once you have located the IP address, Press the Windows key () + R.In the run box type \\ipaddress This is very convenient. this FIX the connection problem! Mac Mount Network Drive Terminal Select your user account from the list on the left and click the Login Items tab on the right side of the window.

A successful ping verifies a TCP/IP connection between the two computers. Click Connect As and type in your username and password for the Seagate Consumer NAS and click Connect. When rebooting you'll no longer be connected to the drive but the icon will still show up in the dock so the drive is still one click away. http://usableflash.com/connect-to/network-cannot-connect.php JP says: January 25, 2015 at 11:50 am He's probably posting in ALL CAPS so that he can read the awful small font text in OS X Yosemite.

THE RESULT IS THAT I CAN NOT CHANGE THE WALLPAPER. Apple makes no representations regarding third-party website accuracy or reliability. Did you figure out how to disable finder from opening on login? Reply diglines02 says: January 22, 2013 at 3:51 pm dude, macs r way better than pc's.

If “Only these users” is selected on the other Mac, make sure the login name you’re using is on the list of allowed users. Note: Make sure you use a backslash (\) and not a forward slash (/).A new File Explorer window should open and you will see the shares on the NAS. On the shared Mac, open Sharing preferences, then select File Sharing. In the ‘Connect to Server’ window, type: cifs://IP Address or afp://IP Address (ex.

What is the problem? Reboot the computer. 5. Without it, you'll be prompted to enter this information each time you log in, eliminating at least half of the purpose of setting up an automatic network drive connection in the This allows you to reconnect to the share with just a click.

Once it's completely disconnected, turn off your computer, and then reboot your router.Wait about two minutes after plugging your router back in and then reconnect the Seagate Consumer NAS's Ethernet cable says: January 25, 2015 at 10:41 am Thanks Buck, Though familiar with various platforms, I am a newbee at this form of communication. When I use both smb://ip address or cifs://ip address from Mac. This really is just a bug with the newest version of Mac OS X, and it will probably be resolved shortly with an update to Mavericks, perhaps as OS X 10.9.1

Regards -- Jim G. The system is still responsive but I can't cancel the mount and it never mounts, it just spins. BarraCuda PC & Gaming – HDD: Fast. Reply Arielct says: February 10, 2016 at 7:24 am Hi, Im using OS X El Captain 10.11.1.

flink41 If I do this in Yosemite with multiple network shares it won't work. widows are boring..LOL! Implemented it and will see the next time I'm at work. AS FAR A I CAN TELL, IT HAPPENED WHEN I WAS TRYING TO CHANGE THE WALLPAPER FROM NIKON'S ViewNX2.